Spezial Produkte

In stock

CHF 5.95

excl. VAT

MD MULTI-TAPE MD MULTI-TAPE is a self-welding tape consisting of PIB (polyisobutylene) and rubber. Welds immediately under tension to an airless, homogenous insulation without temperature and pressure. MD MULTI-TAPE is non-sticky and easy to handle and apply Clean removal after...

MD-Keramikpaste Tube 80g Blistercard

In stock

CHF 10.95

excl. VAT

MD CERAMIC PASTE Can be used as a paste in the temperature range from -20°C to approx. +150°C Contains a solid lubricant that can be used up to +1500°C Contains no metallic pigments Free from graphite, molybdenum sulfide and additives containing sulphur. NSF Listed (Reg. No. 157283)...

MD-contact adhesive brush tin 250g

In stock

CHF 19.50

excl. VAT

MD contact adhesive brush tin 250g Universal, powerful contact adhesive, suitable for wood, plastic, veneer and plastic edges, metal, rubber, leather, felt, soft foam, paper, cardboard and much more . Contact adhesive with strong instant adhesion. Fluid, easy to spread and fast-setting,...

MD-contact adhesive tin 750g

CHF 29.95

excl. VAT

MD contact adhesive tin 750g Universal, powerful contact adhesive, suitable for wood, plastic, veneer and plastic edges, metal, rubber, leather, felt, soft foam, paper, cardboard and much more . Contact adhesive with strong instant adhesion. Fluid, easy to spread and fast-setting, ideal for...

MD-silikon tape transparent roll 1,8m

In stock

CHF 9.95

excl. VAT

MD SILICONE TAPE MD SILIKON-TAPE is a self-amalgamating and insulating adhesive tape which, once applied, forms a homogeneous, permanent, water-free, hermetic and UV-resistant mass. This tape is easy to use and suitable for attachment to porous substrates. Field of use:...

MD-Black-Primer for Windscreen adhesive 38ml

CHF 18.10

excl. VAT

MD BLACK PRIMER The MD BLACK PRIMER was developed as a black pre-treatment for non-ceramic coated glass to provide UV protection. MD BLACKPRIMER is applied before special adhesives are used, e.g. for bonding glass (including PMMA and PC) in the automotive, bus, ship and railway industries....

MD-smoothing agent ultimativ bottle 1000 ml

In stock

CHF 17.50

excl. VAT

MD SMOOTHING AGENT ULTIMATE Ready-to-use, environmentally friendly smoothing agent for modeling and removing sealants . MD SMOOTHING AGENT ULTIMATE is particularly suitable for modeling and removing products based on silicone, MS or hybrid polymer and polyurethane. Can also be used on...

MD-copper paste tin 500g

In stock

CHF 29.50

excl. VAT

MD COPPER PASTE Characteristics: High application temperature range from -30°C to +1300°C Optimum dismantling conditions, even after a very long time High pressure resistance Good electrical conductivity Very good lubricating and separating effect Prevents seizing and rusting of...

MD-Curing Accelerator glass bottle with spray head 15 ml

CHF 11.50

excl. VAT

MD CURING ACCELERATOR The curing accelerator from MARSTON-DOMSEL ensures even faster curing of MD GLUE instant adhesive. Mainly to be used for instant adhesives with higher viscosities. Application: Remove dirt and oil/grease from surfaces to be bonded using e.g. MARSTON CLEANER. MD...

MD-Primer NO 7 for PE/PP glass bottle 15ml with brush

CHF 9.95

excl. VAT

MD PRIMER NO. 7 PP, PE, silicone and Teflon® cannot be bonded together without pre-treatment. If these materials are only bonded with adhesive, without primer, only adhesion and no firm bonding is achieved. The primer allows to bond polyolefins (polyethylene, polypropylene), PTFE, silicone...

MD-Activator for anaerobic spray can 150ml

CHF 13.95

excl. VAT

Optimal for anaerobic liquid plastics The MD ACTIVATOR NO. 11 for anaerobic liquid plastics from MARSTON-DOMSEL accelerates curing, especially at low temperatures. In addition, the use of passive metals, inactive surfaces and larger adhesive gaps is recommended. Economical in...

MD-Activator for CA-Adhesive spray can 150ml

In stock

CHF 12.95

excl. VAT

MD ACTIVATOR NO. 9 for CA adhesives Cleans, degreases parts and accelerates the strength of CA adhesives. Handling strength is achieved in 1-4 seconds depending on CA adhesive, gap between parts and room temperature.

Special products