MD-surface seal 4000.574 Tube 50g
Surface seal 4000.574 medium strength - high viscosity
Gap filling capacity: 0.50 mm
Load: 5 - 8 Nm
Handling time: 15 - 30 minutes
Functional strength: 1 - 3 hours
Temperature resistance: -55°C to + 150°C
- Surface seal hardens completely and therefore has a very high pressure resistance (up to 300 bar - depending on the material and size)
- Surface seal replaces conventional solid seals and can be used universally
- Surface seal is supplied with different viscosities and bridges gaps of up to 0.5 mm
- Ideal for intricately shaped parts
Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and coolants
Application Notes:
Clean the parts to be connected with MARSTON-CLEANER. Apply enough sealant and install. Immediate assembly is not necessary as the material only reacts after the parts have been assembled. Anaerobic liquid plastics do not react with metal/plastic combinations, in such a case an activator must be used. Different types with different strengths and viscosities enable precise adjustment to your application and are crucial for the success of the seal. Final strength after 12 hours. Curing can be started with MD ACTIVATOR NO. 11 to be greatly accelerated.