MD-surface seal 3000.518 cartridge 250g

Surface seal 3000.518 medium strength - high viscosity

Gap filling capacity: 0.50 mm

Load: 7 - 10 Nm

Handling time: 10 - 20 minutes

Functional strength: 1 - 3 hours

Temperature resistance: -55°C to + 150°C

• Surface seal hardens completely and therefore has a very high pressure resistance (up to 300 bar - depending on the material and size)
• Surface seal replaces conventional solid seals and can be used universally
• Surface seal is supplied with different viscosities and bridges gaps of up to 0.5 mm
• Ideal for intricately shaped parts

Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and coolants

Application Notes:

Clean the parts to be connected with MARSTON-CLEANER. Apply enough sealant and install. Immediate assembly is not necessary as the material only reacts after the parts have been assembled. Anaerobic liquid plastics do not react with metal/plastic combinations, in such a case an activator must be used. Different types with different strengths and viscosities enable precise adjustment to your application and are crucial for the success of the seal. Hard after 12 hours. Curing can be done with MD ACTIVATOR NO. 11 to be greatly accelerated.