MD-GLUE Xtreme 2 bottle 25g with foot
MD GLUE XTREME 2 medium viscosity (approx. 120 - 250 mPa.s)
All XTREME adhesives are ISEGA certified (ISEGA No. 40680 U 15)
Label free and NSF registered. (Reg. No. NF151975)
Color: transparent, colorless
Temperature resistance: -50 to +80°C
Handling strength approx. 10 - 120 seconds
- No efflorescence
- Odorless
- No marking
- Stay flexible
- No impairment of electronic components
- Very high adhesive strength
- Top impact resistance
- Good moisture resistance
Application note:
The parts to be bonded must be clean and free of oil and grease. Apply a thin coat of superglue to one side and press the parts together. Depending on the type, the hand strength is reached in a few seconds, final strength after 24 hours. To accelerate curing, our MD ACTIVATOR CA NR. 9 are used. In the case of materials such as PP, PE, Teflon® or silicone, the parts must be pre-treated with MD PRIMER No. 7.