MD-GLUE Evolution 2 bottle 20g
MD-GLUE Evolution 2 medium viscosity (approx. 150 - 250 mPa.s)
All Evolution adhesives are Healthy & Safely (label-free)
Color: transparent, colorless to light yellow
Temperature resistance: -40 to +100°C
Hand strength approx. 5 - 20 seconds
-Properties: Low efflorescence, low odor
-Use: Assembly of plastics, metals, types of rubber
-Specially developed for materials that are difficult to bond
-Suitable for porous/absorbent materials: wood, paper, leather, fabric
-Meets the highest industry standards
-Solvent-free, ideal for demanding applications
-Good performance characteristics: resistance to environmental influences, moderate heat, aging, chemicals
-High strength and fatigue resistance
Application note: The parts to be bonded must be clean and free of oil and grease. Apply a thin layer of superglue to one side and press the parts together. Depending on the type, hand strength is achieved in a few seconds, final strength after 24 hours. To accelerate curing, our MD ACTIVATOR CA NO.9 can be used. For materials such as PP, PE, Teflon® or silicone, the parts must be pretreated with MD PRIMER No. 7.