MD-GLUE BS100.401 bottle 20g

MD GLUE BS100.401 medium viscosity (approx. 100 mPa.s)

For bonding rubber (EPDM), plastic, steel and metals. Sticks in 1 - 3 seconds.

Hand strength: 2 - 10 seconds

Temperature resistance: -60°C to +80°C

Gap Filling Capacity: 0.07mm

• Economical in use
• Precise order possible
• Hand tight in a few seconds
• High impact resistance
• Silicone free
• Very high tensile strength

Application note:

The parts to be bonded must be clean and free of oil and grease. Apply a thin coat of superglue to one side and press the parts together. Depending on the type, the hand strength is reached in a few seconds, final strength after 24 hours. To accelerate curing, our MD ACTIVATOR CA NR. 9 are used. In the case of materials such as PP, PE, Teflon® or silicone, the parts must be pre-treated with MD PRIMER No. 7.