MD-GLUE Blitzschnell bottle 20g
MD GLUE LIGHTNING FAST medium viscosity (approx. 300 - 375 mPa.s)
Despite its high viscosity, the adhesive is super fast and therefore also suitable for EPDM etc. Universal use.
Hand tight: 1 - 10 sec.
Temperature resistance: -40°C to +80°C
Gap filling capacity: 0.15 mm
- Economical in use
- Precise order possible
- Hand tight in a few seconds
- High impact resistance
- Silicone free
- Very high tensile strength
Application note:
The parts to be bonded must be clean and free of oil and grease. Apply a thin coat of superglue to one side and press the parts together. Depending on the type, the hand strength is reached in a few seconds, final strength after 24 hours. To accelerate curing, our MD ACTIVATOR CA NR. 9 are used. In the case of materials such as PP, PE, Teflon® or silicone, the parts must be pre-treated with MD PRIMER No. 7.