MD-GLUE 150.424 bottle 20g
MD GLUE 150.424 medium viscosity approx. 50-100 mPa.s
For the universal use of a wide variety of materials
Hand strength: 8 - 20 seconds
Temperature resistance: -60°C to +80°C
Gap Filling Capacity: 0.10mm
NSF Category Code: P1 No. 150265
- Economical in use
- Precise order possible
- Hand tight in a few seconds
- High impact resistance
- Silicone free
- Very high tensile strength
Application note:
The parts to be bonded must be clean and free of oil and grease. Apply a thin coat of superglue to one side and press the parts together. Depending on the type, the hand strength is reached in a few seconds, final strength after 24 hours. To accelerate curing, our MD ACTIVATOR CA NR. 9 are used. In the case of materials such as PP, PE, Teflon® or silicone, the parts must be pre-treated with MD PRIMER No. 7.